top of page

Fit Models: The Bodies Behind the Garment

Oct 17
5 min read

There is so much to understand about this world. How have we actually got here? How do manufacturers even go about creating and testing a garment? A piece of clothing doesn't just magically appear and then get made to “fit” every size. There is a process behind it. There is a starting point. There is a body.


The truth is that most garments begin life with a base or sample size and a particular body. That body belongs to what the industry calls a fit model.


A fit model isn't the same thing as the wafer-thin models we see walking down a runway. In commercial fashion, a fit model is essentially a living, breathing technical mannequin. A real human body is used to assess a prototype garment physically: its proportions, balance, ease, armholes, shoulders, bust, waist, movement and overall fit. The pattern is developed around that body and then graded from that starting point into the other sizes.


It sounds perfectly reasonable, doesn't it? Surely using an actual human being to test clothing is better than designing everything on a static mannequin. Surely these are real people with real measurements that reflect the population they are making clothes for.


Well... not quite.


Strap in, this is where things get interesting again.


A 2021 peer-reviewed study by sociologist Kjerstin Gruys, published in the journal Fat Studies, examined exactly this issue. In “Fit Models, Not Fat Models: Body Inclusiveness in the U.S. Fit Modeling Job Market,” Gruys conducted a content analysis of 162 online job advertisements for female fit models in the United States. She examined the physical specifications, size ranges and body-shape expectations being demanded by garment manufacturers.


The findings are uncomfortable.


The fit modelling industry does, in fact, recruit across a wider range of sizes than you might expect. Some advertisements included plus-size specifications, with waist measurements reaching up to 48 inches and hips up to 55 inches. On the surface, this might sound like progress. Larger bodies are being acknowledged. Larger garments are being developed. The industry is, at least technically, making room for more sizes.


Look a little closer, however, and something much more revealing appears.


The numbers may have become more inclusive. The shapes have not.


Across both standard and plus-size fit-model advertisements, body proportions remained remarkably rigid. Hourglass proportions were repeatedly sought: a significantly smaller waist in relation to the bust and hips. The expectation wasn't simply that a model should be a particular size. Their body needed to occupy that size in a very particular way.

This is the bit that really matters.


You could be a larger body. You could represent a larger clothing size. You could be part of the industry's move towards “plus-size inclusivity”. Yet your body still had to conform to a very specific physical ideal.


You could be bigger. You just couldn't be different.


That distinction is enormous.


Some of the job advertisements were extraordinarily precise, with applicants warned that their measurements needed to fall within just a quarter of an inch of the required specification. One advertisement reportedly stated: “If you are not the EXACT following measurements, please do not apply!”


Read that again.


This isn't simply a request for somebody who happens to be a certain size. This is the selection of a body down to fractions of an inch!


The industry isn't asking, “Can we find a woman whose body represents the women who will eventually buy this garment?” It is asking, “Can we find a body that matches our specification?”


Those two questions sound similar.


They are not.


This is where the idea of the fit model becomes so important to understanding why so many clothes fail us. The fit model isn't simply there to check whether a garment technically fits. Their body becomes part of the engineering process. Their proportions influence the pattern. Their shape influences the fit. Their measurements become the physical reference from which the garment is developed and graded.


That means the body at the beginning of the process matters enormously.


If that body has a small waist, relatively full hips and bust, the garment is engineered around those relationships. If the next body has the same bust measurement but a larger waist, or a fuller stomach and narrower hips, or broader shoulders and a smaller bust, those differences don't simply disappear because both people have been allocated the same clothing size.


A size is not a body shape.


This seems obvious when you say it out loud. Yet the fashion industry has built an enormous system around pretending otherwise.


Grading can increase the measurements of a pattern. It can reduce them. It can proportionally scale certain elements according to a grading rule. What it cannot do is take one body shape and somehow transform it into every other body shape that happens to share the same numerical measurements.


A pattern can be graded from a size 10 to a size 20. That doesn't mean a size 20 woman is simply a larger version of the size 10 woman. Yet clothing is manufactured and sold as though increasing the numbers on a pattern will somehow account for all of this variation.

It doesn't.


This is why the language of “size inclusivity” can be so misleading. A brand can offer a size 6 through to a size 30 and still design those garments around a remarkably narrow understanding of what a body is supposed to look like.


Gruys' research exposes something particularly uncomfortable here. The industry may be willing to accommodate larger bodies within the technical production process, but those bodies are still expected to conform to normative standards of proportion and symmetry. The larger body is acceptable when it remains recognisable as the industry's preferred shape.


Which brings us to the title of Gruys' paper: “Fit Models, Not Fat Models.”


That phrase is brutal.


It captures something much bigger than the recruitment practices of a handful of fashion companies. It exposes the conditions attached to inclusion. A body can be welcomed into the technical process, provided it behaves itself. Provided its measurements fall within the required specifications. Provided its curves occur in the expected places. Provided its proportions remain aesthetically acceptable.


In other words, the industry doesn't necessarily reject the larger body. It rejects the inconvenient body.


That is the part that makes me angry.


We have spent decades being told that our bodies are the problem. We have been told that we chose the wrong size, that we need more ease, that we need to lose weight, that we need to choose a different cut, that our proportions are unusual, that our shape is difficult to fit.


Once again, we're back to this question: What if the body isn't the problem?


Finally, I looked to see whether there was any legislation specifically linked to fit models and found a raft of safeguarding measures in place for the hyper-thin runway models. When digging for specific guidance relating to fit models, the United Kingdom and United States appear to rely largely on voluntary codes of conduct and guidelines from organisations such as the British Fashion Council, alongside Advertising Standards Agency and wider industry guidance.


A cursory search for “fit models” on these websites offered zero results.


Kjerstin Gruys



1 Comment


Forrest
Oct 23

radio jingle creator has become my go-to for the little idents on my podcast, and this post kept reminding me of it: in audio, one 'standard' voice gets stretched across every format, just as one fit model gets graded up and down and expected to fit every body. The Gruys study really nails it — the numbers became more inclusive, but the shape never did. A size is not a body shape, and a pitch-shifted voice is not a different voice either; scaling something up is not the same as designing for difference.

Like
bottom of page